BLYVS - SULF-O-CUT, 486
- MSDS: BLYVS
- Manufacturer: G C LUBRICANTS CO
- Product Name: SULF-O-CUT, 486
- National Stock Number: 9150-00N023951
Product Identification
Product ID:SULF-O-CUT, 486
MSDS Date:09/02/1988
FSC:9150
NIIN:00N023951
MSDS Number: BLYVS
Responsible Party
SAN CARLOS, CA 94070
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 415-592-1050
Cage: 0HJB5
Contractor
Telephone: (415) 592-1050
Cage: 0HJB5
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: UNKNOWN - NO HISTORY OF HEALTH
HAZARDS WITH THIS PRODUCT. CHRONIC: PROLONGED AND REPEATED SKIN
CONTACT MAY CAUSE IRRITATION/DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN CONDITIONS.
First Aid
First Aid:INHAL:UNDER FIRE CNDTNS, MOVE AWAY FROM AREA TO FRESH AIR.
RESUSCITATE & ADMINISTER O*2. CONSULT MD. EYE:IMMED FLUSH W/PLENTY
OF WATER FOR AT LEAST 15 MIN. HOLD LIDS APART TO INSURE FLUSHING OF
ENTIRE EYE. SEE MD. SKIN:WASH ALL CONTAMD AREAS W/PLENTY OF SOAP &
WATER. WASH ALL CONTAMD CLTHG BEFORE RE-USE. INGEST:DO NOT INDUCE
VOMIT. CONSULT MD IMMED. NEVER GIVE ANYTHING BY MOUTH TO AN UNCON
PERSON.
Fire Fighting
Flash Point:340F,171C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT (F PN). FIRE YIELDS CARBON MONOXIDE, CARBON
DIOXIDE AND HYDROGEN CHLORIDE GAS.
Unusual Fire/Explosion Hazard:MATL SHOULD BE TREATED AS AN OIL WHEN
EXPOSED TO FIRE. OVER-PRESSURIZATION WILL OCCUR WHEN CONTAINER IS
EXPOSED TO FIRE. USE WATER TO COOL FIRE EXPOSED CNTNRS.
Accidental Release
Spill Release Procedures:CONTAIN WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USE NORMAL GOOD PRACTICES.
Other Precautions:DO NOT INGEST.
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:VENTILATION APPROPRIATE. LOCAL EXHAUST, SUGGESTED;
MECHANICAL (GENERAL), ACCEPTABLE.
Protective Gloves:LATEX REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED FOR NORMAL OPERATIONS.
Work Hygienic Practices:WASH ALL CONTAMINATED CLOTHING BEFORE RE-USE.
ALWAYS WASH HANDS PRIOR TO SMOKING AND EATING.
Supplemental Safety and Health
MATLS TO AVOID: AND POTASSIUM HYDROXIDE. THE PRESENCE OF IRON OR ZINC
IN ANY FORM WILL CATALYZE THIS REACTION.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:550F,288C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:0.93
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:DARK BROWN LIQUID.
Percent Volatiles by Volume:0.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS NITRIC ACID, HYDROGEN PEROXIDE &
CHROMIC ACID.STRONG ALKALIES SUCH AS SODIUM (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FIRE YIELDS CARBON MONOXIDE, CARBON
DIOXIDE AND HYDROGEN CHLORIDE GAS.
Disposal
Waste Disposal Methods:INCINERATE OR BURY IN A LICENSED CHEMICAL WASTE
DISPOSAL SITE OR I/A/W LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.